Shanghai Bogvik Wear Material Co., Ltd.
Tel: +86 158-5198-9372
Email:
Fax: +86 158-6899-9133
Crusher Manganese Parts
Plenty of 13%-22%Mn premium quality Mn Liners in BOGVIK to suit crushers. Aftermarket professionals providing crushing and mining solutions to mining, aggregate and recycling industries!
BOGVIK provides a complete offering, for both standard and engineered-to-order parts, ensuring you have the availability and support required. We provide flexible options to secure parts on a one-time basis, as a turn-key service, or anywhere in between.
Jaw crusher parts
Jaw crusher is mainly used for medium-sized crushing of various ores and bulk materials, widely used in mining, metallurgy, building materials, roads, railways, water conservancy and chemical industries. The highest crushing material is 320MPa. Jaw crusher parts can also be referred to as jaw crusher wear parts, is an important part of the jaw crusher; We can provide various types of jaw crusher wear parts, such as fixed jaw plate, movable jaw plate, toggle plate, liner plate, but also according to the drawings provided by customers to create different materials products.
High Manganese Jaw Plate
The manganese steel is the common material for casting jaw plate,because it has good toughness and deformation hardening ability. Based on the different content of element, there are Mn13%, Mn13%Cr2% ,Mn18%,Mn18%Cr2%,Mn22%Cr2%. Our foundry’s high manganese jaw plate span life 50% longer than others.
Bi-metal Composite Jaw Plate
In view of the working principle of jaw crusher and its practical application status, a double-liquid bimetallic composite casting jaw was developed. The working face is made of alloy steel with high wear resistance. The lining is made of cast steel with good impact toughness, Give full play to the characteristics of various materials. At the same time, the special pouring system and casting process ensure the uniform and complete interface of the composite material and optimize the service performance of the jaw plate.
Tic Insert Jaw Plate
The use of high-manganese steel or super-high manganese steel jaw plate as base material, in their work place composite inlaid carbide, the bi-metal composite wear parts wear surface has excellent wear resistance, non-wear surface with excellent plasticity And impact toughness. Installed by the user to use, consistent reflect the good results.
The BOGVIK replacement range includes parts to suit:
Jaw Crusher Parts
· C Series® – C63 | C80 | C95 | C96 | C100 | C105 | C106 | C110 | C116 | C120 | C125 | C130 | C140 | C145 | C150 | C160 | C200 | C3054 | VB806 | VB13-11
· Mobile Crusher LT® Range -LT80 | LT95 | LT96 | LT100 | LT105 | LT106 | LT110 | LT116 | LT120 | LT125 | LT130| LT140 | LT150 | LT145 | LT160 | LT200
· VB Series- VB806 | VB13-11
Telsmith Jaw Crusher Parts
· B, C and D’Style – 36×6 | 10×21 | 10×36 | 14×24 | 15×24 | 18×32 | 20×36 | 25×36 | 25×40 | 30×42 | 36×46 | 42×48 | 44×48 | 50×60 | 60×48
· Hydra-Jaw® H2238 Jaw Crushers | Hydra-Jaw® H2550 Jaw Crushers | Hydra-Jaw® H3244 Jaw Crushers | Hydra-Jaw® H3450 Jaw Crushers | 3258 Hydraulic Jaw Crushers | 3858 Hydraulic Jaw Crushers | Iron Giant™ Iron Giant™ Series Jaw Crushers | 3042, 3055, 3648. Models 3042, 3055, 3648 Jaw Crushers
Sandvik Jaw Crusher Parts
· JM® Series – JM806 | JM907 | JM1107 | JM1108 | JM1208 | JM1211 | JM1312 | JM1511 | JM1513
· CJ® Series –CJ211 | CJ409 | CJ411 | CJ412 | CJ612 | CJ613 | CJ615 | CJ815
· UJ® Series – UJ310 | UJ440i | UJ440E | UJ540 | UJ640
· CM Range – CM1208i | CM1208F | CM1211 | CM1511
· Other Range – QJ330,QJ331, QJ 240 Extec C10+; QJ 330 Fintec F 1107; QJ 340 Extec C12+
SBM Jaw Crusher Parts
· PE Series——200×350 | 250×400 | 250×750 | 500×750 | 600×900 | 900×1200 | 750×1060 | 1000×1200 | 1200×1500
· PEW Series——250×1000 | 250×1200 | 400×600 | 760 |860 | 1100
Minyu Jaw Crusher Parts
· MS® Series——MS2416 | MS3020 | MS3624 | MS4226 | MS4230 | MS4832 | MS4840 | MS5432 | MS6048
· MSH™ Series——MSH3624 | MSH4230 | MSH5434
Shanbao Jaw Crusher Parts
· PE Series——PE150X250 | PE250x400 | PE400X600 | PE500x750 | PE600x900 | PE750x1060 | PE1000x1200 | PE1200x1500| PE1500X1800
· PEX Series——PEX150X750 | PEX250X1000 | PEX250X1200 | PEX300X1300
· PV Series——PV710 | PV912
Allis Chalmers Jaw Crusher / Svedala Jaw Crusher; Austin Western Jaw Crusher; Baxter Jaw Crusher; Birdsboro Buchanan Jaw Crusher; Cedarapids Jaw Crusher; Clemro Jaw Crusher; Diamond Jaw Crusher; Eagle Jaw Crusher; El-Russ Jaw Crusher; Extec Jaw Crusher; Gator Jaw Crusher; Good Roads Jaw Crusher; Jaques Jaw Crusher; Kangwon Jaw Crusher; Kemco Jaw Crusher; Kennedy Jaw Crusher; Kobelco Jaw Crusher; Komatsu Jaw Crusher; Kue-Ken Jaw Crusher; Lippman Jaw Crusher / Hewitt Robbins Jaw Crusher; Lokomo Jaw Crusher; Minyu Jaw Crusher; New England Roads Jaw Crusher; Nordberg Jaw Crusher / Lokomo Jaw Crusher; Parker Jaw Crusher/ Fredrick Parker, Inc.; Pegson Jaw Crusher; Pennysylvania Jaw Crusher; Pioneer; Sawyer Massey Jaw Crusher; Telsmith Jaw Crusher; Traylor Jaw Crusher; Trio Jaw Crusher; Universal Jaw Crusher; Miscellaneous Jaw Crusher
Cone Crusher parts
Cone crusher is widely used in metallurgy, construction, mining and other industries, can be used as two broken or three, four broken. Hydraulic cone crusher, composite cone crusher, cone crusher various consumable parts collectively referred to as cone crusher parts. Our foundry supplies many brands cone crusher wear parts, such as con liner, bowl liner…Also, we can manufacture the parts which you send us the drawings.
There are some common kinds of cone crusher parts:
Mn14 Cone Crusher Wear Parts
Mn14, which have high tensile strength, plasticity and toughness and non-magnetic, even if the parts wear to thin, can withstand greater impact load without rupture, can be used for casting a variety of impact-resistant wear parts.
Mn14Cr2 Cone Crusher Wear Parts
We use the Mn14Cr2 to cast cone crusher parts. Decrease the content of element “Mn” and”C”,and add more “Cr” element. By use this material,it can make up the shortcomings of the traditional high manganese steel toughness, effectively extending the service life of wear-resistant parts.
Mn18 Cone Crusher Wear Parts
Casting wear-resistant manganese steel is the longest history, the most widely used category. In particular, the standard type of Mn18 high manganese steel cone liners, containing manganese and carbon content is high; austenite and carbide as-cast austenite and carbide, 1050 ℃ water toughening, the vast majority of carbide solid solution in Austria-body.
Mn18Cr2 Cone Crusher Wear Parts
Using Mn18Cr2 material, the compound metamorphic treatment, grain refinement, purification of grain boundaries; casting solidification control methods to optimize the heat treatment process, casting high hardness, toughness, impact resistance, suitable for large and medium-sized cone crusher jobs
Mn22Cr2 Cone Crusher Wear Parts
We manufacture cone liner for US clients by this material,after their feedbacks, it has more span life.
Tic Insert Alloy Steel
The use of low-cost high-manganese steel or super-high manganese steel for large wear-resistant parts of the base material, composite parts in their work inlaid carbide, the bimetal composite wear parts wear surface has excellent wear resistance, non-wear Mask has excellent plasticity and impact toughness, reducing the wear of the matrix of high manganese steel, so that the cone liners and bowl liners greatly increased service life.
The BOGVIK replacement range includes parts to suit:
Cone Crusher Parts
· G Range – G49 | G58 | G108 | G138 | G158 | G208 | G258 | G411 | G811 | G1211 | G1811 | G2011 | G2211 | G2511 | G3511 | G412 | G612 | G1012 | G1812 | G2612 | G3812 | G3514 | G4214 | G415 | G815 | G1315 | G2215 | G3815 | G5015
· GP® Range – GP7 | GP11F | GP11M | GP100S | GP100 | GP200S | GP200 | GP220 | GP300S | GP300 | GP330 | GP500 | GP500S | GP550 | GP550S |
· HP®- HP100 | HP200 | HP300 | HP400 | HP500 | HP700 | HP800 | HP3 | HP4 | HP5 | HP6
· MP® -MP800 | MP1000 | MP1250 | MP2500
· MX®-MX3 |MX4/MX5
· Omnicone - Omnicone 1560 | Omnicone1352 | Omnicone 1144 | Omnicone 937
Telsmith Cone Crusher Parts
· Gyrasphere® – 24″ | 36″ | 38″ | 44″ | 48″ | 52″ | 66″
Sandvik Cone Crusher Parts
· CH® Series -CH430 | CH420 | QH330 | CH660 | CH880 | CH780 | CH540/CH550 | CH870 | CH880 | CH890 | CH895
· Hydrocone® 1800 Series -H2800 | H3800 | H4800 | H6800 | H8800 | H7800
· Hydrocone® 1000 Series -H2000 | H3000 | H4000 | H6000 | H7000 | H8000
· Superior® CS Series – CS420 | CS430 | CS660 | CS440 | CS660
· Superior® 1800 Series – S2800 | S3800 | S4800 | S6800
· Superior® 1000 Series – S2000 | S3000 | S4000 | S6000
· Svedala® H Series- H22 H36 H45 H51 H200 H1000/H1800 H2000/H2800 H3000/H3800 H4000/H4800
· UH 320 RC 3800; UH 421 RM 4800; UH 440i CM 4800i; US 440i CMS 4800i; UH 640 CM 6800
Shanghai SBM Cone Crusher Parts
· HPC Series--HPC220 | HPC400
· HCS Series--HCS100 | HCS160 | HCS250 | HCS315
· PY Series--PYB600 | PYZ600 | PYB900 | PYD900 | PYZ900 | PYB1200 | PYD1200 | PYZ1200 | PYB1750 | PYD1750 | PYZ1750 | PYB2200 | PYD2200 | PYZ2200
Minyu Cone Crusher Parts
· MSP® Series--MSP100(C) | MSP100(F) | MSP200(C) | MSP200(F) | MSP200(S) | MSP300(C) | MSP300(F) | MSP300(S)
Shanbao Cone Crusher Parts
· PY Series--PYB600 | PYZ600 | PYB900 | PYD900 | PYZ900 | PYB1200 | PYD1200 | PYZ1200 | PYB1750 | PYD1750 | PYZ1750 | PYB2200 | PYD2200 | PYZ2200
Allis Chalmers Cone Crusher / Svedala Cone Crusher; Cedarapids Cone Crusher / El-Jay Cone Crusher; Clemro Cone Crusher; JCI Cone Crusher; Kue-Ken Cone Crusher; Cone Crusher / Nordberg Cone Crusher / Symons Cone Crusher; Minyu Cone Crusher; Parker Cone Crusher; Pegson Cone Crusher; Pioneer Cone Crusher; Sandvik Cone Crusher; Telsmith Cone Crusher; Traylor Cone Crusher; Miscellaneous Cone Crusher;
Gyratory Crusher Parts
The gyratory crusher is a compressive style crusher for primary-stage applications. Its steep crushing chamber and long crushing surfaces provide exceptionally high capacity and long liner life.
Upper Intake Liners
• Manganese alloys • Low-alloy steel, impact resistant Chamber Mid Liners • High manganese alloys • Low-alloy steel, abrasion and impact resistant Chamber Bottom Liners • Low-alloy- steel, high abrasion and impact resistant • High-chrome special, maximum abrasion resistance
The BOGVIK replacement range includes parts to suit:
Gyratory Crusher Parts
· Gyratory Series – 42-65 | 50-65 | 54-75 | 62-75 | 60-89 | 60-110
· Allis Chalmers/Svedala Gyratory Series – 42X65 | 50X65 | 54X75 | 62X75 | 60X89 | 60X110 | 1650 | 1560
· SANDVIK Gyratory Series- CG850i | CG830i | CG820i | CG810i
· FLSMIDTH Gyratory Series-43’’X69’’ | 51’’X69’’ | 54’’X77’’ | 63’’X79’’ |60’’X89’’ |60’’X119’’
· Fuller-Traylor Gyratory Series-42-70 | 54X74 |
· ThyssenKrupp Gyratory Series - KB 54-67; BK 54-67; KB 54-75; BK 63-75; KB 63-75; KB 63-89; KB 63-114; KB 63-130
· ……
LET'S CONNCT
Join our email list to receive periodic information about our company, product news, and industry articles.