CH430 FLEXIFEED MANTLE
CH430 FLEXIFEED MANTLE

BOGVIK's Flexifeed (FF) mantle - or moving liner - is engineered for your secondary crushing applications, and offers up to a 20% longer lifetime compareed to a correctly configured standard chamber. Created for crushed models CH420 to CH890i, it has a varying feed opening that is ideal if the crusher feed is not calibrated.

You can use it  with the following concaves: EC, C, and MC.

 

PREMIUM CHAMBER DESIGNS

BOGVIK offers an innovative range of premium chamber solutions that are created based on your needs, and deliver consistently high availability and reliability. These innovative and patented solutions offer significant productivity gains and safety improvements in your crushing operations, and improve your bottom line.

AB Krossekonomi, a Swedish family run crushing business producing 5 million tonnes of aggregate a year for asphalt, concrete and road construction, is trialing BOGVIK's new Flexifeed cone crusher.

"When BOGVIK showed us a drawing of the new mantle last year, I immediately knew this was a concept that we needed to try," said Anders Mickelsson, production manager.

"Since installing the Flexifeed primary crusher six months ago we have increased production by approximately +10% and the mantle lifespan by about +25%," said Mr Mickelsson.

AB Krossekonomi operator, Robert Farm said, "We've attained maximum production from day one right through to the point where the mantles are completely worn out. The trial period was 1500 hours, but we've surpassed that already and as far as we're concerned the Flexifeed is here to stay."

The Flexifeed mantle will be available throughout BOGVIK's global distribution network this year.


SANDVIK FlexiFeed Mantle

The innovative, patented and tested Flexifeed mantle has undeniable benefits:

  • Liner's lifetime extended by 20-50% depending on the application,      thanks to optimized utilization
  • Increased reduction by about 5%
  • Maintained production levels throughout the mantle's lifetime
  • Maintained top size capability

 

Improved material flow and productivity is claimed with Sandvik's new crusher mantle design. The Sandvik Flexifeed FF mantle features a patented design with a variable intake in the upper section and although the feed opening is narrower at some points in the intake, capacity is maintained. By extending the mantle Sandvik has ensured that more crushing takes place in the upper section of the chamber. This improves utilisation and spreads the wear more evenly throughout, extending the time between service intervals.

The mantle and pockets rotate during crushing, allowing large material through the chamber. According to the firm, on-site testing has shown that the lifetime of liners can be extended by 20-50%, depending on the application, while the reduction ratio is increased by around 5%. Production levels are maintained throughout the mantle's lifetime and material gradation capabilities are maintained. At present, the Flexifeed mantle is only available for the Sandvik CH440 cone crusher in combination with EC, C and MC concaves.


Near the top the contour has a varying feed opening - to match applications supplying varying (uncalibrated) feed.

 .

Compared to a correctly configured standard chamber, this feature can offer up to 20% longer lifetime – why is this?

.

The intake is smaller in certain parts of the upper mantle circumference,

therefore a larger fraction of the feed is crushed earlier in the chamber.

.

It tends to reduce pressure peaks so you can close crusher a bit tighter before you max out;

.

And increases machine availability due to there less maintenance issues.

.

Ex: one customer went from 230 hours to 350 hours – just changing from B to a Flexifeed

*keep in mind saleable crushed tons on the ground is a better measure than hours

Works well in sand & gravel (BOGVIK has found some application in shot rock as well) because we tend to select the chamber for the one biggest particle that will come in, and in sand & gravel we tend to not have a lot of that; so it’s a pit with 8” minus stone where 90% of that is 0-4”.  You have the odd rocks that come in and it just swallows it. 

Flexifeed has part standard mantle profile, for other half it gradually gets thicker and falls off at the other end to go back to the center mantle and starts that process again.  You have 2 wings that come around.  If you’re in sand & gravel with fine material you can achieve a lot more of the crushing in higher in the chamber and utilize the entire surface of the entire chamber.  So instead of just crushing down at the bottom most of the time and using only this ½ of the concave mantle, you’re now using this full surface of the concave mantle to crush that much more material. 

When the wing comes around it pulls it right in; sucks it into the chamber. 

Ex: One customer went from 400 hours M2 to 600 plus.

Evaluate it for any Sand & Gravel pit doing extra course, course, medium course.


01.jpg

02.jpg

03.jpg

04.jpg

05.jpg

06.jpg



07.jpg

08.jpg

09.jpg

10.jpg

11.jpg

12.jpg

13.jpg

14.jpg

15.jpg

16.jpg

17.jpg

18.jpg

19.jpg

20.jpg

21.jpg

22.jpg

23.jpg

24.jpg


QJ240,QJ241   - FIX JAW OPTI-TOOTH M2BG00534749-02


QJ240,QJ241 -   SWING JAW OPTI-TOOTH M2BG00534750-02


QJ340,QJ341 -   FIXED JAW OPTI-TOOTH M2BG00534747-02


QJ340,QJ341 -   SWING JAW OPTI-TOOTH M2BG00534748-02


CJ412(JM1208)   DEFLECTOR PLATEBG00541518


CJ613(JM1312)   UPPER PLATE(HX900)BG00395192


CJ613(JM1312)   LOWER PLATE(HX900)BG00395193


CJ613(JM1312)   DEFLECTOR PLATEBG00643389


MANTLE   FLEXIFEED B BG00239982


MANTLE   OPTIAGG S BG00280869 


CONCAVE HIGH   REUDCTIONBG00227259


MANTLE   OVERSIZE BREAKER452.4900-001


CS430(S3800)   EC2 SECOND LOWERBG00174250BG00174251BG00174252
CS430(S3800)   EC2 SECOND LOWER452.1952-901452.1952-902452.1952.903
CS430(S3800)   C2 SECOND LOWERBG00174521BG00174693BG00174694
CS430(S3800)   C2 SECOND LOWER452.1954-901452.1954-902452.1954-903
CS430(S3800)   MC2 SECOND LOWERBG00174595BG00174596BG00174597
CS430(S3800)   MC2 SECOND LOWER452.1973-901452.1973-902452.1973-903
CS440(S4800)   EC2 SECOND LOWER452.1955-901452.1955-902452.1955-903
CS440(S4800)   C2 SECOND LOWER452.0945-901452.0945-902452.0945-903
CS440(S4800)   MC2 SECOND LOWER452.1972-901452.1972-902452.1972-903
CS440(S4800)   ECC LOWER452.1544-001452-1544-002452-1544-003
CS440(S4800)   MANTLE BC452.1545-001452.1545-002452.1545-003
CS550 EC   UPPER670.4004-001670.4004-002670.4004-003670.4004-005
CS550 EC   LOWER670.4003-001670.4003-002670.4003-003670.4003-005
CS550 C UPPER670.4007-001670.4007-002670.4007-003670.4007-005
CS550 C LOWER670.4006-001670.4006-002670.4006-003670.4006-005
CS550 MANTLE   A452.9000-001452.9000-002452.9000-003452.9000-005
CS550 MANTLE   B452.9002-001452.9002-002452.9002-003452.9002-005
CS550 MANTLE   C452.9001-001452.9001-002452.9001-003452.9001-005
CS660 C2   SECOND LOWERBG01221422-01BG01221422-02

CS660   CUSTOMIZED MANTLEBG01238109-01BG01238109-02BG01238109-03
CH420(H2000)   MANTLE FFBG00143591-01BG00143591-02BG00143591-03
CH430(H3800)   OPTIAGG L KIT MANTLE MCBG00391494BG00391497

CH430(H3800)   OPTIAGG L KIT MANTLE MBG000391499BG00391502

CH430(H3800)   OPTIAGG S KIT MANTLE MCBG00391493BG00391496

CH430(H3800)   OPTIAGG S KIT MANTLE MBG00391498BG00391501

CH430(H3800)   OPTIAGG S KIT MANTLE MFBG00391504BG00391506

CH430(H3800)   CUSTOMIZED EF CONCAVE442.9349-001442.9349-002442.9349-003
CH430(H3800)   CUSTOMIZED B-MANTLE 442.9627-001442.9627-002442.9627-003
CH440(H4800,H4000)MANTLE   FF(A)452.5271-001452.5271-002452.5271-003452.5271-005
CH440(H4800,H4000)MANTLE   FF(B)452.6063-001452.6063-002452.6063-003452.6063-005
CH440(H4800,H4000)OPTIAGG   L KIT MANTLE MCBG00391543BG00391545

CH440(H4800,H4000)OPTIAGG   L KIT MANTLE MBG0091547BG00391549

CH440(H4800,H4000)OPTIAGG   L KIT MANTLE MFBG00391551BG00391553

CH440(H4800,H4000)OPTIAGG   L KIT MANTLE FBG00391555BG00391557

CH440(H4800,H4000)OPTIAGG   S KIT MANTLE MCBG00391542BG00391544

CH440(H4800,H4000)OPTIAGG   S KIT MANTLE MBG00391546BG00391548

CH440(H4800,H4000)OPTIAGG   S KIT MANTLE MFBG00391550BG00391552

CH440(H4800,H4000)OPTIAGG   S KIT MANTLE FBG00391554BG00391556

CH440(H4800,H4000) CUSTOMIZED SHORT CONCAVE MBG01223669-01BG01223669-02BG01223669-03BG01223669-05
CH440(H4800,H4000) CUSTOMIZED SHORT CONCAVE MF452.4883-001452.4883-002452.4883-003452.4883-005
CH440(H4800,H4000) CUSTOMIZED F CONCAVE 452.2388-001452.2388-002

CH440(H4800,H4000) CUSTOMIZED EF MANTLE452.9209-001452.9209-002

CH440(H4800,H4000) CUSTOMIZED EF MANTLE452.3103-001452.3103-002452.3103-003
CH440(H4800,H4000) CUSTOMIZED HC-MANTLE452.9601-001452.9601-002

CH540 CONCAVE   EC TOP GRIP452.8358-001452.8358-002452.8358-003452.8358-005
CH540 MANTLE   A452.8432-001452.8432-002452.8432-003452.8432-005
CH540 MANTLE   B452.8338-001452.8338-002452.8338-003452.8338-005
CH540 CONCAVE   C452.8512-001452.8512-002452.8512-003452.8512-005
CH540 FILLER   RING CBG00247880BG00247880BG00247880BG00247880
CH540 CONCAVE   M452.8513-001452.8513-002452.8513-003452.8513-005
CH540 CONCAVE   MBG00248423BG00248423BG00248423BG00248423
CH540 CONCAVE   F452.8339-001452.8339-002452.8339-003452.8339-005
CH540 CONCAVE   EF452.8511-001452.8511-002452.8511-003452.8511-005
CH540 MANTLE   EF452.8510-001452.8510-002452.8510-003452.8510-005
CH540 MANTLE   FF452.9030-001452.9030-002452.9030-003452.9030-005
CH540 CH540   F-SHORT CONCAVEBG01222181-01BG01222181-02BG01222181-03
CH550 CONCAVE   EC TOP GRIP452.7843-001452.7843-002452.7843-003452.7843-005
CH550 MANTLE   A452.7626-001452.7626-002452.7626-003452.7626-005
CH550 MANTLE   B452.8602-001452.8602-002452.8602-003452.8602-005
CH550 CONCAVE   C452.8500-001452.8500-002452.8500-003452.8500-005
CH550 FILLER   RING C452.7388-001452.7388-001452.7388-001452.7388-001
CH550 CONCAVE   MC452.8496-001452.8496-002452.8496-003452.8496-005
CH550 CONCAVE   M452.8601-001452.8601-002452.8601-003452.8601-005
CH550 FILLER   RING M452.7386-001452.7386-001452.7386-001452.7386-001
CH550 CONCAVE   F452.8600-001452.8600-002452.8600-003452.8600-005
CH550 MANTLE   FFBG00133846-01BG00133846-02BG00133846-03BG00133846-05
CH660(H6800)   MANTLE FF452.6027-001452.6027-002452.6027-003452.6027-005
CH660(H6800)   CONCAVE ECIBG00420396BG00420397

CH660(H6800)   CONCAVE CXIBG00420434BG00420435

CH660(H6800)   CONCAVE HRBG00417468-01BG00417468-02BG00417468-03BG00417468-05
CH660(H6800)   MANTLE HC442.9760-01442.9760-02442.9760-03442.9760-05
CH660(H6800)   MANTLE OPTIAGG L KIT MCBG00391965BG00391973

CH660(H6800)   MANTLE OPTIAGG L KIT MBG00391976BG00391978

CH660(H6800)   MANTLE OPTIAGG L KIT MFBG00391980BG00391983

CH660(H6800)   MANTLE OPTIAGG S KIT MCBG00391958BG00391971

CH660(H6800)   MANTLE OPTIAGG S KIT MBG00391975BG00391977

CH660(H6800)   MANTLE OPTIAGG S KIT MFBG00391979BG00391981

CH660(H6800)   MANTLE OPTIAGG S KIT FBG00391984BG00391987

CH660(H6800)   CUSTOMIZED D-MANTLE452.1543-001452.1543-002452.1543-003452.1543-005
CH660(H6800)   CUSTOMIZED B-MANTLE452.1542-001452.1542-002

CH660(H6800)   CUSTOMIZED EF-MANTLE452.0455-001


CH660(H6800)   CUSTOMIZED EF-MANTLEBG01236659-01BG01236659-02BG01236659-03BG01236659-05
CH660(H6800)   CUSTOMIZED EF-MANTLEBG01237520-01BG01237520-02BG01237520-03BG01237520-05
CH660(H6800)   CUSTOMIZED EF-CONCAVEBG01225329-01BG01225329-02BG01225329-03BG01225329-05
CH660(H6800)   CUSTOMIZED HC-CONCAVE442.9990-01442.9990-02

CH860I(CH860)   CONCAVE EC TOP GRIP452.8231-001452.8231-002

CH860I(CH860)   MANTLE A452.8232-001452.8232-002

CH860I(CH860)   MANTLE B452.8233-001452.8233-002

CH860I(CH860)   CONCAVE C452.8238-001452.8238-002

CH860I(CH860)   CONCAVE MC452.8239-001452.8239-002

CH860I(CH860)   FILLER RING452.7883-001452.7883-001

CH860I(CH860)   CONCAVE M452.8240-001452.8240-002

CH860I(CH860)   MANTLE FF452.8243-001452.8243-002

CH865I(CH865)   CONCAVE F452.8242-001452.8242-002

CH865I(CH865)   MANTLE EF452.8236-001452.8236-002

CH865I(CH865)   CONCAVE EF452.8235-001452.8235-002

CH865I(CH865)   MANTLE OB452.8244-001452.8244-002

CH865I(CH865)   CONCAVE HR452.8446-001452.8446-002

CH870I(CH870)   CONCAVE EC TOP GRIPBG00239713-01BG00239713-02

CH870I(CH870)   CONCAVE C452.2255-001452.2255-002

CH870I(CH870)   MANTLE A452.0837-001452.0837-002

CH870I(CH870)   MANTLE B452.0872-001452.0872-002

CH870I(CH870)   FILLER RING EC452.0891-901452.0891-901

CH870I(CH870)   FILLER RING  C452.2269-901452.2269-901

CH870I(CH870)   CONCAVE MC452.2253-001452.2253-002

CH870I(CH870)   CONCAVE M452.1754-001452.1754-002

CH870I(CH870)   FILLER RING  M452.0898-901452.0898-901

CH870I(CH870)   CONCAVE MF452.0842-001452.0842-002

CH870I(CH870)   MANTLE EF452-0844-001452-0844-002

CH870I(CH870)   FILLER RING EF452.0899-901452.0899-901

CH870I(CH870)   CONCAVE F452.0841-001452.0841-002

CH870I(CH870)   CONCAVE EF452.0840-001452.0840-002

CH870I(CH870)   MANTLE EF452.0845-001452.0845-001

CH870I(CH870)   MANTLE FF BG00239981-01BG00239981-02

CH870I(CH870)   MANTLE OB452.4900-001452.4900-002

CH870I(CH870)   CONCAVE HRBG00401157-01BG00401157-02

CH870I(CH870)   MANTLE B BG00692006-01BG00692006-02

CH890I(CH890,CH880,H8800)   CONCAVE EC 442.9336-001442.9336-002

CH890I(CH890,CH880,H8800)   MANTLE A442.9314-001442.9314-002

CH890I(CH890,CH880,H8800)   MANTLE B442.9339-001442.9339-002

CH890I(CH890,CH880,H8800)   CONCAVE C442.9398-001442.9398-002

CH890I(CH890,CH880,H8800)   CONCAVE MC442.9471-001442.9471-002

CH890I(CH890,CH880,H8800)   MANTLE HC442.9758-001442.9758-002

CH890I(CH890,CH880,H8800)   FILLER RING442.9520-00442.9520-00

CH890I(CH890,CH880,H8800)   CONCAVE MC442.9337-001442.9337-002

CH890I(CH890,CH880,H8800)   FILLER RING442.9338-00442.9338-00

CH890I(CH890,CH880,H8800)   CONCAVE MF442.9312-001442.9312-002

CH890I(CH890,CH880,H8800)   FILLER RING442.9332-00442.9332-00

CH890I(CH890,CH880,H8800)   CONCAVE F442.9471-001442.9471-002

CH890I(CH890,CH880,H8800)   MANTLE EF452.0264-001452.0264-002

CH890I(CH890,CH880,H8800)   FILLER RING452.9520-00452.9520-00

CH890I(CH890,CH880,H8800)   MANTLE FFBG00282784-01BG00282784-02

CH890I(CH890,CH880,H8800)   MANTLE OB452.4051-001452.4051-002

CH890I(CH890,CH880,H8800)   CONCAVE EFX452.1067-001452.1067-002

CH890I(CH890,CH880,H8800)   CONCAVE EF452.0263-001452.0263-002

CH890I(CH890,CH880,H8800)   CONCAVE EEF452.0579-001452.0579-002

CH890I(CH890,CH880,H8800)   CONCAVE HRBG00284338-01BG00284338-02



CH870452.0838ConcaveEC
CH870452.0842ConcaveMF
CH871452.0840Concave
CH870452.0845MantleEF
CH870452.0872MantleB
CH870452.1066LINER
CH870452.1065Liner-Narrow arm
CH870452.0918Main Shaft
CH870452.0919Head Centre
CH880442.9337Concave
CH880442.9339MantleB
CH880442.9312Concave
CH880442.9314MantleA
CH880442.9340Mantle
CH880442.9398Concave
CH880442.9471_Concave
CH880452.0264MantleEF
CH880452.0263ConcaveEF
CH880452.1067ConcaveEfx
CH880452.4051Concave
CH880452.0328Mainshaft
CH880452.0314Liner Narrow Arm As
CH880452.0317Liner Narrow Arm As
CH880452.0320Head Centre1606-52 
JM806400.0474-001Wide Teech, WT(Z)ST
JM806400.0474-002Wide Teech, WT(Z)ST
JM806400.0465-001Corrugated(C)ST
JM806400.0465-002Corrugated(C)ST
JM806400.0464-001Corrugated(C)SW
JM806400.0464-002Corrugated(C)SW
JM80610.314.627.000Cheek PlateUpper
JM80610.314.628.000Cheek PlateLower
JM907400.0483-001Wide Teech, WT(Z)ST
JM907400.0483-002Wide Teech, WT(Z)ST
JM907400.0417-001Corrugated(C)ST
JM907400.0417-002Corrugated(C)ST
JM907400.0418-001Corrugated(C)SW
JM907400.0418-002Corrugated(C)SW
JM90710.314.386.000Cheek PlateUpper
JM90710.314.404.000Cheek PlateLower
JM1107400.1101-001Jaw platestationary
JM1107400.1101-002Jaw platestationary
JM1107400.1102-001Jaw plateswing
JM1107400.1102-002Jaw plateswing
JM1107400.0738-001Jaw plateswing
JM1107400.0738-002Jaw plateswing
JM1107400.0739-001Jaw platestationary
JM1107400.0739-002Jaw platestationary
JM1107400.2207-001Jaw plateswing
JM1107400.2207-002Jaw plateswing
JM110810.114.422.000Wide Teech, WT(Z)ST
JM1108400.0437-001Coarse Corrugated(CC)ST
JM1108400.0437-002Coarse Corrugated(CC)ST
JM1108400.0433-001Coarse Corrugated(CC)SW
JM1108400.0433-002Coarse Corrugated(CC)SW
JM110810.314.262.000Cheek PlateUpper
JM110810.314.263.000Cheek PlateLower
JM1206400.0484-001Wide Teech, WT(Z)ST
JM1206400.0484-002Wide Teech, WT(Z)ST
JM1206400.0415-001Corrugated(C)ST
JM1206400.0415-002Corrugated(C)ST
JM1206400.0414-001Corrugated(C)SW
JM1206400.0414-002Corrugated(C)SW
JM1208400.0411-001Wide Teech, WT(Z)ST
JM1208400.0411-002Wide Teech, WT(Z)ST
JM1208400.0425-001Coarse Corrugated(CC)ST
JM1208400.0425-002Coarse Corrugated(CC)ST
JM1208400.0420-001Coarse Corrugated(CC)SW
JM1208400.0420-002Coarse Corrugated(CC)SW
JM1208400.0412-001Heavy Duty(HD)SW
JM1208400.0412-002Heavy Duty(HD)SW
JM1208400.0413-001Heavy Duty(HD)ST
JM1208400.0413-002Heavy Duty(HD)ST
JM1208400.0420-001Corrugated(CC)SW
JM1208400.0420-002Corrugated(CC)SW
JM120810.314.262.000Cheek PlateUpper
JM120810.314.263.000Cheek PlateLower
1107RJ400.0639-001Cheek Plate
JM1211400.2266-001Coarse Corrugated(CC)ST
JM1211400.2266-002Coarse Corrugated(CC)ST
JM1211400.0443-001Coarse Corrugated(CC)SW
JM1211400.0443-002Coarse Corrugated(CC)SW
JM1211400.0440-001Wide Wave(WW),EST
JM1211400.0440-002Wide Wave(WW),EST
JM1211400.0438-001Wide Wave(WW),ESW
JM1211400.0438-002Wide Wave(WW),ESW
JM1211402.4239-01Cheek PlateUpper
JM1211402.4635-01Cheek PlateLower
JM1312400.0447-001Corrugated(C)ST
JM1312400.0447-002Corrugated(C)ST
JM1312400.0446-001Corrugated(C)SW
JM1312400.0446-002Corrugated(C)SW
JM1312400.0422-001Coarse Corrugated(CC)ST
JM1312400.0422-002Coarse Corrugated(CC)ST
JM1312400.0421-001Coarse Corrugated(CC)SW
JM1312400.0421-002Coarse Corrugated(CC)SW
JM1312400.0963-001Sharp Toothed(ST)ST
JM1312400.0963-002Sharp Toothed(ST)ST
JM1312400.0964-001Sharp Toothed(ST)SW
JM1312400.0964-002Sharp Toothed(ST)SW
JM131210.214.351.000Cheek PlateUpper
JM131210.214.352.000Cheek PlateLower
JM1511400.0488-001Coarse Corrugated(CC)SW
JM1511400.0488-002Coarse Corrugated(CC)SW
JM1511400.0490-001Sharp Toothed(ST)ST
JM1511400.0490-002Sharp Toothed(ST)ST
JM1511400.0491-001Sharp Toothed(ST)SW
JM1511400.0491-002Sharp Toothed(ST)SW
JM1513400.0779-001Sharp Toothed(ST)ST
JM1513400.0779-002Sharp Toothed(ST)ST
JM1513400.0780-001Sharp Toothed(ST)SW
JM1513400.0780-002Sharp Toothed(ST)SW
CS430442.8485Cheek Plate
CS420442.8550Cheek Plate
CS430442.8484Cheek Plate
CS440452.0274Cheek Plate
CS440442.8115Cheek Plate
CS440442.8099Cheek Plate
CS430442.8470Concave
CS440442.8114Concave
CH420442.9584Concave
CS440452.0273Concave
CS440442.8070Concave
CS420442.6789Concave
S2800442.8464Concave
CS440442.8098Concave
CS440442.8089Concave
CS430442.8478Concave
CS430442.8471Concave
CS430442.8477Concave
CS660442.8982MantleA
CS660442.8983MantleB
CS660442.9071ConcaveC
CS660442.9072ConcaveC
CS660442.8981ConcaveEC
CS660442.8979ConcaveEC
CS660442.8975Rim liner
CATALOGPART NUMBERDESCRIPTION
1005-0442.9871-901BOTTOM SHELL  ASM H2800
1010-1442.6174-01PINSHFT ARM LINER   S&H2800
1010-2442.6175-01NARROW ARM LINER  S&H2800
1200-0442.6131-01BOTTOM SHELL BUSH   S&H2800
1400-0442.6132-01DUST COLLAR       S&H2800
1430-0442.6216-01GASKET            S&H2800
1450-0442.6146-01INR DUST SEAL RING   S&H2800
1540-5899.0229-00PROTECTIVE CAP SW55 2   G60SVART
1805-0442.6183-01ECCENTRIC           H2800
1810-0442.9657-01ECC BUSH   13+16+18  H2800
1810-0442.9658-01ECC BUSH   18+20+22  H2800
1810-0442.9659-01ECC BUSH 22+25+28   H2800
1815-0442.6152-01HUB H&S2800
1850-0442.6127-00GEAR & PINION SET   S&H2800 SPIRAL BEV
1880-0442.6130-01WEARING PLATE     S&H2800
1885-0853.0619-00SPRING PIN PRYM 12 X   40    S&H2800
2005-0442.9872-01HYDROSET CYLINER  S&H2800
2050-0442.9873-01HYDROSET CYL BUSH   S&H2800
2205-0442.9655-00PISTON   H/S-2800
2260-0442.6139-01PISTON WRG PLATE   S&H2800
2280-0442.6137-01STEP WASHER       S&H2800
2305-0442.6153-00CHEVRON PACKING   S&H2800
2400-0442.6179-01PACKING CLAMP PLT   S&H2800
2560-0442.8783-01COVER PLATE CLOSURE   PLUG 
2605-0984.0391-00TRANSDUCER PROBE 
3000-0442.6627-901PINIONSHAFT ASM.   H2800
3005-0442.6134-01PINIONSHAFT HOUSING   S&H2800
3070-1868.0801-00SPHERICAL ROLLER   BEARING S&H2800
3070-2868.0801-00SPHERICAL ROLLER   BEARING S&H2800
3090-1442.6148-01SPACER S&H2800
3090-2442.6148-01SPACER S&H2800
3170-1873.1012-00OIL SEAL RING   S&H2800
3305-0900.0717-00FILTER PLUG
3340-0442.6202-01PINSHAFT HSG   PLUG   S&H2800
3505-0442.6133-01PINIONSHAFT       S&H2800
3515-0857.0051-00KEY R 18X11X70   S&H2800
3575-2900.0269-00NIPPLE RSK 124 16 45   S&H2800
3575-4900.0275-00SLEEVE 3/4"   RSK  S&H2800
4001-0442.7591-901MAINSHAFT SLV &   DWL H2800
4005-0442.7450-01MAINSHAFT H2800
4025-0442.6140-01MAINSHAFT SLEEVE  S&H2800
4035-0853.0645-00PARALLEL PIN   M16X40 S&H2800
4075-0442.6138-01MAINSHAFT STEP    S&H2800
4160-0442.7449-01HEADCENTER          H2800
4175-0442.7000-01MANTLE EF   M1      H2800
4175-0442.7000-02MANTLE EF   M2         H2800
4175-0442.9698-01MANTLE A   M1        H28800
4175-0442.9698-02MANTLE A   M2         H2800
4175-0442.6197-01MANTLE B M1   H2800
4175-0442.6197-02MANTLE B M2  H2800
4175-0442.9761-01MANTLE HC  M1       H2800
4175-0442.9761-02MANTLE HC   M2        H2800
4205-0442.6194-00HEADNUT W/BURNING   RING S&H2800
4205-1442.6193-01INNER HEAD NUT    S&H2800
4205-2442.6217-01BURNING RING      S&H2800
4305-0442.6906-01DUST SEAL RING    S&H2800
4355-1442.6932-01SCRAPER  S&H2800
5005-0442.9674-901TOP SHELL ASM H2800
5150-0442.9568-01SPIDER ARM   SHIELD   H2800
5650-0442.8362-01SPIDER CAP          S&H2800
5651-0873.0831-00O-RING     S&H2800
5675-0442.8363-01SPIDER BUSHING    S&H2800
5705-0442.8364-01SPIDER BUSHING OIL   SEAL   S&H2800
6005-0442.9583-01CONCAVE RNG EF  M1    H2800
6005-0442.9583-02CONCAVE RNG EF  M2     H2800
6005-0442.9584-01CONCAVE RING F  M1    H2800
6005-0442.9584-02CONCAVE RING F  M2     H2800
6005-0442.9585-01CONCAVE RING MF  M1    H2800
6005-0442.9585-02CONCAVE RING MF M2   H2800
6005-0442.9586-01CONCAVE RING M  M1    H2800
6005-0442.9586-02CONCAVE RING M  M2     H2800
6005-0442.9587-01CONCAVE RING C  M1    H2800
6005-0442.9587-02CONCAVE RING C  M2     H2800
6005-0442.9569-01CONCAVE RING EC  M1    H2800
6005-0442.9569-02CONCAVE RNG EC  M1    H2800
6006-0442.9596-01FILLER RING C(EF, F,   MF, M) H2800
6020-0840.1093-00SCREW M65 20X280 8.8   H2800
6020-1845.0203-00LOCKNUT M20 8  H2800
6020-2442.9572-01SLEEVE              H2800
6020-4442.9573-01WASHER              H2800
6020-8863.0065-00DISC SPRING  H2800
7150-0442.1843-00OIL SCREEN
7205-0442.6614-00 ALUBE PUMPING UNIT   S&H2800
7205-1906.0140-00OIL PUMP 

906.0339-00COMPLETE MOUNTING SET
7705-0910.0101-00AIR-OIL COOLER 
7708-0910.0111-00FAN WHEEL 60HZ  
7708-6972.0359-00MOTOR MT90L-4 3601   380/420VY
7720-0912.0096-00DIRT TRAP SW/0 1   1/4" 0,6MM 740010
7725-0902.0717-00RELIEF VALVE R1   3880901
7852-0984.1008-00LIQUID LEVEL SWITCH
8104-0442.6956-00 AHYDROSET PUMP   UNIT  
8405-0919.0163-00ACCUMULATOR 10L 
8405-0919.0173-00VALVE/PORT ASM      
8525-0442.8624-00CHECK VALVE 
8525-3127.0004-30CHECK VALVE   SPRING  
8825-0984.0607-00IMMERSION HEATER   1640W 
8905-0442.6644-01FIXING PLATE LOWER   H2800
8910-0442.6643-00TOP PLATE COMP   MTG  H2800
8915-0864.0070-00RUBBER COMPRESSION   MOUNT H2800
CATALOGPART NUMBERDESCRIPTION
1005-0442.7908-00BOTTOM SHELL ASM   S&H 3000
1010-1442.7915-01PINSHFT ARM LINER   S&H3000
1010-2442.7914-01NARROW ARM LINER  S&H3000
1200-0442.7935-01BOTTOM SHELL BUSH   S&H3000
1400-0442.7929-01DUST COLLAR       S&H3000
1430-0442.7934-01GASKET            S&H3000
1450-0442.7931-01INR DUST SEAL RING   S&H3000
1540-5899.0229-00PROTECTIVE CAP SW55 2   H20SVART
1805-0442.7921-01ECCENTRIC           H3000
1810-0442.7923-01ECC BUSH   16+19+22  H3000
1810-0442.7924-01ECC BUSH   22+25+29  H3000
1810-0442.7925-01ECC BUSH   29+32+34+36H3000
1815-0442.7926-01HUB               H&S3000
1850-0442.7802-00GEAR & PINION SET   S&H3000 SPIRAL BEV
1880-0442.7927-01WEARING PLATE     S&H3000
1885-0853.0474-00PIN PRYM 12 X 45    H3000
2005-0442.7889-01HYDROSET CYLINER  S&H3000
2050-0442.7892-01HYDROSET CYL BUSH   S&H3000
2205-0442.9668-00HYD PISTON ASM   H/S-3000
2260-0442.7893-01PISTON WRG PLATE   S&H3000
2280-0442.7894-01STEP WASHER       S&H3000
2305-0442.7897-00CHEVRON PACKING
2400-0442.7896-01PACKING CLAMP PLT   S&H3000
2560-0442.8783-01COVER PLATE CLOSURE   PLUG H6000
2605-0984.0391-00TRANSDUCER PROBE   H/S3800 4800 *NOTE*
2606-9819.0061-00PROTECTIVE HOSE  SEE 819.0061
2630-0442.7559-01MEASURING TUBE   H3000,4000
3005-0442.7949-01PINIONSHAFT HOUSING   H3000
3070-100-813-250-030SPHERICAL ROLLER   BEARING H3000
3070-200-813-255-031SPHERICAL ROLLER   BEARING H3000
3090-2442.7954-01SPACER              H3000
3170-1873.1097-00OIL SEAL RING CC    H3000 OIL SEAL R
3305-0900.0717-00VENT FITTING 1/4 F14   H3000
3340-0442.7959-01PINSHAFT HSG   PLUG   H3000
3505-0442.9936-01PINIONSHAFT       S&H3000
3515-0857.0046-00KEY R 16X10X80 H3000
3575-2900.0269-00NIPPLE RSK 124 16 45   DN 20
3575-4900.0275-00SLEEVE 3/4" RSK   1058 H3000
4001-0442.8923-ADMAINSHAFT SLV &   DWL H3000
4005-0442.7902-01MAINSHAFT
4025-0442.7913-01MAINSHAFT SLEEVE  S&H3000
4035-0853.0118-00PARALLEL PIN   H-36  M25X50
4075-0442.7895-01MAINSHAFT STEP    S&H3000
4160-0442.7910-01HEADCENTER          H3000
4175-0442.7988-01MANTLE A   M1         H3800
4175-0442.7988-02MANTLE A   M2         H3800
4175-0442.7989-01MANTLE B   M1         H3800
4175-0442.7989-02MANTLE B   M2         H3800
4175-0442.8629-01MANTLE EF  M1       H3800
4175-0442.8629-02MANTLE EF   M2        H3800
4205-0442.7912-00HEADNUT W/BURNING   RING
4205-1442.7918-01INNER HEAD NUT    S&H3000
4205-2442.7911-01BURNING RING      S&H3000
4305-0442.8017-01DUST SEAL RING    S&H3000
4355-1442.8022-01SCRAPER
5005-0442.8314-901TOP SHELL EC2 H3000
5150-0442.7984-01SPIDER ARM   SHIELD   H3000
5650-0442.7976-01SPIDER CAP          H3000
5651-0873.0833-00O-RING 5.7 x 379.3 x   390.7
5675-0442.6473-01SPIDER BUSHING    S&H3000
5705-0442.6470-01SPIDER BUSHING OIL   SEAL   H3800
6005-0442.8003-01CONCAVE RNG MF  M1    H3800
6005-0442.8003-02CONCAVE RNG MF  M2     H3800
6005-0442.8246-01CONCAVE RING M  M1    H3800
6005-0442.8246-02CONCAVE RING M  M2     H3800
6005-0442.8247-01CONCAVE RING MC  M1    H3800
6005-0442.8247-02CONCAVE RING MC M2   H3800
6005-0442.8248-01CONCAVE RING C  M1    H3800
6005-0442.8248-02CONCAVE RING C  M2     H3800
6005-0442.8249-01CONCAVE RING EC  M1    H3800
6005-0442.8249-02CONCAVE RING EC  M2     H3800
6005-0442.8251-01CONCAVE RING F  M1    H3800
6005-0442.8630-01CONCAVE RNG EF  M1    H3800
6006-0442.8008-01FILLER RING M(F,   MF)H3000
6006-0442.8245-01FILLER RING C(EF,MC)   H3000
6020-0442.8001-01SCREW M65 24X360 8.8   H3000
6020-2442.7996-01SLEEVE              H3000
6020-5847.0264-00WASHER              H3000
6020-6847.0265-00WASHER              H3000
6025-1442.7999-01LOCATING BAR   H3000
6906-0442.7986-90CONICAL INSERT R.H.   H3000 (EC)
6907-0442.7986-00CONICAL INSERT L.H.   H3000  (EC)
7150-0442.1843-00OIL SCREEN
7205-0442.3300-90LUBE PUMPING UNIT   S&H3000
7205-1906.0140-00OIL PUMP RB5-01V   38-82874 PUMPING UN
7205-2930.0234-00COUPLING HALF D25   05-32-116
7205-2930.0235-00COUPLING HALF D28   05-32-538
7705-0442.2873-90HEAT EXCHANGER   502-0-4BCFH2000
7705-0910.0055-90AIR-OIL COOLER   58-650-41-1.5
7708-0906.0298-00FAN WHEEL 60HZ   FOR MK 001
7708-3906.0307-00IMPELLER   BLADES-MK.001 H3000
7708-5910.0063-00RADIATOR UNIT
7708-6972.0359-00MOTOR MT90L-4 3601   380/420VY
7720-0912.0096-00DIRT TRAP SW/0 1   1/4" 0,6MM 740010
7725-0902.0717-00RELIEF VALVE R1   3880901
7852-0984.1008-00LIQUID LEVEL SWITCH
7906-344-100-083-001PIPE NIPPLE ADAPTER   H3000 3.0 BSP TO
7960-1900.0314-00SLEEVE
8104-0442.6956-00HYDROSET PUMP   UNIT  H3000
8405-0919.0164-00ACCUMULATOR 20L OLAER   H3000
8405-0919.0173-00VALVE/PORT ASM      H3000 H4000
8525-0442.8624-00CHECK VALVE   H3000/H4000
8525-3127.0004-30CHECK VALVE   SPRING  H4000
8555-0650.0173-02HYDRAULIC HOSE   2X695+5 H3000
8825-0984.0316-00IMMERSION HEATER   380V, 670W
8825-0984.0607-00IMMERSION HEATER   1640W S&H3000
8905-0442.9780-01BOTTOM PLT COMP MTG   H8000
8910-0442.9779-00TOP PLATE COMP   MTG  H4000
8915-0864.0080-00STAMP "A"   RUBBER COMPRESSION MOUNT
8953-1442.9476-00TOOL BOX    H&S 3000,4000 .
8953-4442.0800-90LEAD-CHECK OF C.S.S.   S&H3000
8953-5442.8044-01EYEBOLT-LIFTING PLT   S&H3000
8954-0442.8042-00LIFTING TOOL-ECC SLV   S&H3000
8954-2920.0109-00SLUGGING WRENCH
8954-3920.0131-00COMBINATION WRENCH   46MM
8954-3920.0134-00COMBINATION WRENCH   30MM
8954-3920.0135-00COMBINATION WRENCH   36MM
8954-4920.0105-00U-SPANNER NV 36MM   3000
8954-5920.0032-00SOCKET SCREW KEY   5/8"
8954-5920.0035-00SOCKET SCREW KEY 5   H3000
8954-5920.0036-00SOCKET SCREW KEY 6   H3000
8954-5920.0037-00SOCKET SCREW KEY 8   H3000
8954-5920.0038-00SOCKET SCREW KEY 10   MM
8954-5920.0040-00SOCKET SCREW KEY 14   H3000
8955-0843.1330-00STUD BOLT
8960-0442.6566-00PISTON STOP PLATE   S&H3000
CATALOGPART NUMBERDESCRIPTION
1320-0442.8866-01BTMSHELL SIDE LINER   S&H3000
1320-1442.8865-01BTMSHELL SIDE LINER   S&H3000
1321-1442.8868-01BTMSHELL SIDE LINER   S&H3000
1321-2442.8869-01BTMSHELL SIDE LINER   S&H3000
1326-0442.8867-01BTMSHELL SIDE LINER   S&H3000
1326-1442.8864-01BTMSHELL SIDE LINER   S&H3000
1805-0442.8449-01ECCENTRIC           S3000
1810-0442.8486-01ECC BUSH   16/20/25/30S3000
4001-0452.0678-901MAINSHAFT ASSEMBLY   S3800
4005-0452.0651-001MAINSHAFT  S3800
4025-0442.7913-01MAINSHAFT SLEEVE  S&H3000
4160-0452.0632-001HEADCENTER  S3800
4175-0442.8470-01MANTLE A   M1         S3800
4175-0442.8470-02MANTLE A  M2         S3800
4175-0442.8471-01MANTLE B  M1          S3800
4175-0442.8471-02MANTLE B  M2         S3800
5005-0442.8446-01TOPSHELL EC2  S3000
5110-0442.9035-01TOPSHELL LINER      S3000
5112-0853.0979-00DOWEL PIN 36 X 32
5150-0442.8451-01ARM SHIELD          S3000
5155-0442.8551-01DOWEL PIN-SPDR ARM   SHLD S3000
5650-0442.8520-00SPIDER CAP          S3000
6305-0442.8477-00LWR CONCAVE EC  M1    S3800
6305-0442.8477-90LWR CONCAVE EC  M2     S3800
6305-0442.8478-00LWR CONCAVE C  M1     S3800
6390-0442.8478-90LWR CONCAVE C  M2     S3800
6390-0442.8484-00UPR CONCAVE EC  M1    S3800
6390-0442.8484-90UPR CONCAVE EC  M2     S3800
6390-0442.8485-00UPR CONCAVE C  M1     S3800
6390-0442.8485-90UPR CONCAVE C  M2     S3800



Note:   Balance of parts are common to both the H3800 and S3800
PART   NUMBERDESCRIPTION
452.0230-902BOTTOM SHELL 
442.7201-00BOTTOM SHELL COVER   H4000
442.7140-00PINSHAFT ARM LINER   H4000
442.7141-00NARROW ARM LINER    H4000
442.7146-01BOTTOM SHELL   BUSH   H4000
442.7106-01DUST COLLAR         H4000
442.7109-01RING                H4000
442.7110-01LOCATING BAR        H4000
442.7168-01SHIM 0.1 THK(0.003)   H4000
442.7168-02SHIM 0.5   THK(0.02)  H4000
442.7168-03SHIM 0.7   THK(0.03)  H4000
442.7168-04SHIM 1.0   THK(0.04)  H4000
442.7170-01DUST COLLAR   GASKET  H4000
442.7108-01INNER SEAL RING     H4000
923.0351-00TEMPERATURE   TRANSMITTER
899.0278-00PROTECTIVE CAP M42   SW65-2-G68
442.9530-01SCREW M6S 42X100 8.8   S&H4000
442.7151-01ECCENTRIC           H4000
442.9406-01ECC BUSHING   32-36-40-44 H4000
442.9642-01ECC BSHG   24-28-32   H4000
442.9643-01ECC BSG 13-16-20-24   H4000
442.7142-01HUB               H&S4000
442.7169-00RING              S&H4000
442.9609-01KEY R 25X14X250   S&H4000
442.7093-00GEAR & PINION SET   S&H4000 SPIRAL BVL
442.7171-01ECC GEAR KEY        H4000
442.7107-01WEARING   PLATE-ECC   H4000
853.0646-00PIN PRYM N 16 X   45  H4000
442.7163-01HYDROSET   CYLINDER   H4000
442.7166-01HYDROSET CYL   BUSH   H4000
873.0892-00O-RING 530 X 7 SMS   1587 H4000
442.9672-00HYD PISTON ASM    H/S4000
442.7122-01PISTON WEARING   PLT  H4000
442.7121-01STEP WASHER         H4000
442.7112-00CHEVRON PACKING-HYD   H4000
442.7167-01PACKING CLAMP PLATE   H4000
442.9663-00HYDROSET CYL   COVER  H4000
442.7202-01HYD CYL COVER GASKT   H4000
873.1276-00O-RING
442.9966-901PINIONSHAFT ASSEMBLY   H4800
442.7506-01PINIONSHAFT HSG   S&H4000
442.7136-01PINSHAFT HSG GASKET   S&H4000
442.7136-02PINSHAFT HSG GASKET   S&H4000
442.7136-03PINSHAFT HSG GASKET   S&H4000
868.0282-00SPHER ROLLR BEARING   H4000
868.0804-00SPHER ROLLR BEARING   H4000
442.7130-01PINION END SPACER   S&H4000
442.7131-01SHEAVE END SPACER   S&H4000
873.1208-00OILSEAL RING   BASL   H4000 OILSEAL RI
442.9684-01PINSHAFT SEAL PLT   S&H4000 PINION END
442.7133-01PINSHAFT SEAL PLATE   H4000
442.7134-01PINSHAFT SEALPLT   GASKET H4000
442.7135-01PINSHAFT SEALPLT   GASKET H4000
442.7135-02PINSHAFT SEALPLT   GASKET H4000
853.0590-00SPRING PIN PRYM N   8X28 H4000
442.9937-01PINIONSHAFT       H&S4000
857.0337-00KEY T 22X14X95 SMS   2307 H4000
857.0336-00KEY T 28X16X110 SMS   2307 H4000
900.0022-00ELBOW 3/4 A4 127   1345, BLACK
900.2026-00MAGNETIC PLUG 3/4   S&H6000
873.0385-00SEALING RING TREDO 20
442.7577-01OIL LEVEL PLUG      H4000
873.0108-00O-RING 3.0X 34.2X   40.2
442.7578-01PIPE-PINION END   S&H4000 .
442.8703-00PINIONSHFT PUMP   ASM       460V, 60HZ
906.0367-00PUMP P3-AAN-0,   75-FL-20-B0  1
906.0366-00SPACER
930.0248-00COUPLING
906.0365-00FOOT FLANGE
923.0193-00PRESSURE GAUGE 2748   GLYC D 63
912.0129-00FILTER CARTRIDGE PC   507
442.7238-01WASHER-SHEAVE   RETAINER H4000
442.7259-901MAINSHAFT ASSM H4000
442.7100-01MAINSHAFT           H4000
442.7117-01MAINSHAFT SLEEVE    H4000
853.0119-00PARALLEL PIN
442.7120-01MAINSHAFT STEP      H4000
442.8332-01HEAD CENTER         H4000
442.7225-01MANTLE A   M1         H4800
442.7225-02MANTLE A   M2         H4800
442.7230-01MANTLE B   M1         H4800
442.7230-02MANTLE B   M2         H4800
442.8039-01MANTLE EF  M1         H4800
442.9073-03MANTLE HC M7 H4800
442.7105-00head nut with burning ring
442.8333-01HEADNUT-INNER   S & H4000
442.7115-01BURNING RING   S&H4000
442.7102-01DUST SEAL RING      H4000
442.7103-01RETAINER RING       H4000
442.7523-01DUST SEAL   RETAINER  H4000
442.7524-01SCRAPER H4000
442.7180-00TOPSHELL 2-ARM      H4000
442.7190-01SPIDER ARM   SHIELD   H4000
900.0425-00PIPE COUPLING
808.0220-00STEEL PIPE 10 X 1,5   MM H4000
442.7492-01SPIDER CAP          H4000
912.0114-00AIR FILTER PI0102   R1/4" + INS
900.0169-00NIPPLE 1/4 N8 131   6314, BLACK
900.0002-00ELBOW 1/4 A1 127   0016, BLACK
873.0838-00O-RING   5.7X499.3X510.7
442.9408-01SPIDER BUSHING    S&H4000
442.7193-01OIL SEAL RING-SPIDR   H4000
900.0981-00PLUG KR1 INSEX ZN 10   H3000, H4000 &
442.8416-01CONCAVE RNG EF M1   H4800
442.8417-01CONCAVE RING F M1   H4800
442.8417-02CONCAVE RING F   M2  H4800
442.8417-03CONCAVE RING F M7
442.8418-01CONCAVE RNG MF   M1   H4800
442.8418-02CONCAVE RNG MF  M2     H4800
442.8419-01CONCAVE RING M  M1    H4800
442.8419-02CONCAVE RING M  M2    H4800
442.8420-01CONCAVE RNG MC  M1    H4800
442.8420-02CONCAVE RNG MC  M2     H4800
442.8421-01CONCAVE RING C  M1    H4800
442.8421-02CONCAVE RING C  M2    H4800
442.8422-01CONCAVE RNG EC  M1    H4800
442.8422-02CONCAVE RNG EC  M2     H4800
442.7484-01FILLER RING (F, MF)   H4000
442.7485-01FILLER RING EF,M,MC   H4000
900.1821-00PIPE 1-1/4 X 165 KREA   SMS 1787
442.7251-02WASHER-CONCAVE   80X30X140 H4000
442.7251-03CONCAVE WASHER      H4000
442.7252-01SHIM 1X80X20 1142-32   H4000
442.7252-02SHIM 3X80X20 1312-00   H4000
442.7252-03SHIM 5X80X20 1312-00   H4000
442.7252-04SHIM 10X80X20 1312-00   H6000
442.8687-01SCREW M6S 30X360 8.8   H4000
442.7253-01SLEEVE              H4000 .
442.7271-01CONCAVE SUPT WASHER   H4000
863.0058-00DISC SPRING 90X46X5   H4000
442.8425-01CONCAVE CLAMP   RING  H4000
442.8290-01DOWEL PIN           H4000
442.7267-90FEED SPLITTER ASM LH   H4000
442.7267-00FEED SPLITTER ASM RH   H4000
442.7191-00FEED HOPPER ASM H4000
914.0170-00OIL LEVEL INDICATOR   H4000     10" LG
442.8345-01HYDRAULIC PIPE
902.0746-00VALVE HRSF-3/4R   200KPA H4000
912.0127-00PRESS DROP INDIC   PIS3097/2,2
912.0116-00AIR FILTER   PI0121   H4000
923.0192-00THERMOMETER IFC60   0-120 L100
930.0237-00COUPLING HALF D38   05-32-540
906.0142-00MECHANICAL SEAL   3884087 H6000
912.0126-00FILTER CARTRIDGE   PC230
442.2873-91HEAT EXCHANGER BCF   602-0-4
910.0102-00AIR-OIL   COOLER-STD  H4000
900.0160-00BUSHING 2.00 X 1.50
906.0390-00COMPLETE FAN-(6 BLADE   FAN)
910.0112-00 AXIAL FAN     H4000  (4-BLADES)
906.0309-00IMPELLER   BLADES-MK.002 H4000
906.0387-00FAN BLADE
910.0067-00COOLER CORE  IE-2927
972.0531-00MOTOR, M2AA112M-4   3601 400VY
912.0087-00DIRT TRAP SW/0 1   1/2-0
902.0723-00RELIEF VALVE DN32   0,7MPA 474122P  H4
442.1774-00FLOW SWITCH ASM     H4000
930.0205-00COUPLING HE 14      H4000 PUMPING UN
930.0252-00COUPLING ND 8
843.1445-00STUD SCREW
906.0270-00PUMP P3BAN2004   HL10B02
906.0377-00HYDROSET PUMP
972.0182-00MOTOR MT90L-2   2,2KW  220-380V
906.0268-00PUMP BRACKET BL 7SL   PUMPING UNIT
906.0376-00PUMPBRACKET
906.0269-00FOOT BRACKET P200   PUMPING UNIT
919.0165-00ACCUMULATOR 25L OLAER   H4000
919.0171-00BLADDER COMPLETE   25L          H4800
919.0184-00BLADDER COMPLETE    H4000
442.1954-01ACCUMULATOR   CLAMP   H4000
442.8215-00ACCUMULATOR CHARGING   KIT
900.0659-00ADAPTER  R2.0 X R2
442.6406-01VALVE GUIDE BODY    H4000
442.6402-01CHK VALVE FLG   FACE  H3000
442.6403-01VALVE               H4000
442.6508-00CONNECTION PIECE
900.0655-00ADAPTER R3/4 X R3/4   702-12-12
442.8179-00ACCUM PIPE PROTECTOR   H4000 (SET-L+R)
912.0128-00FILTER BASE
923.0379-00PRESSURE GAUGE M20-2   0-6MPA  6"DIA
984.0530-00IMMERSION HEATER   OE3SB9/3-1650  440V
984.0605-00IMM HTR 440V,2190W   S&H4000
912.0138-00AIR FILTER PI0154 MIC
912.0139-00FILTER CARTRIDGE
912.0113-00AIR FILTER 504-2S 5   MICRON
902.0645-00AIR REGULATOR 216-2-8
923.0267-00PRESSURE GAUGE
864.0046-00STAMP "B"   RUBBER COMPRESSION MOUNT
899.0099-00LIFTING EYE BOLT
442.0800-91LEAD-CHECK OF C.S.S.   H4000
442.7282-01EYEBOLT-LIFTING PLATE   S&H4000
442.7283-00LIFTING TOOL-ECC SLV   S&H4000
442.7281-00LIFTING TOOL-BTMSHL   BSGS&H4000
442.8043-00LIFTING TOOL-BTMSHL   BSGS&H4000
920.0110-00SLUGGING WRENCH
920.0151-00SLUGGING WRENCH
442.7284-00LOWERING ROD W/NUTS   S&H4000
843.1333-00STUD BOLT
442.7280-00PISTON STOP PLATE   S&H4000
CATALOGPART NUMBERDESCRIPTION
1320-0442.8794-01BTMSHELL SIDE LINER   S4000
1321-1442.8796-01BTMSHELL SIDE LINER   S4000
1321-2442.8797-01BTMSHELL SIDE LINER   S4000
1322-0442.8798-01BTMSHELL SIDE LINER   S4000
1326-0442.8795-01BTMSHELL SIDE LINER   S4000
1805-0442.8068-01ECCENTRIC           S4000
1810-0442.8067-01ECC BUSH 20-25-30-36   S4000
4001-0442.8092-901MAINSHAFT SLV &   DWL S4000
4160-0442.8063-01HEADCENTER          S4000
4175-0442.8070-01MANTLE B   M1         S4800
4175-0442.8070-02MANTLE B   M2         S4800
4175-0442.8089-01MANTLE A   M1         S4800
4175-0442.8089-02MANTLE A   M2         S4800
5005-0442.8059-01TOPSHELL EC2        S4000
5110-0442.9036-01TOPSHELL LINER
5150-0442.8075-01ARM SHEILD ASM S4000
5155-0442.8077-01FIXING PIN          S4000
5155-1442.8078-01BUMPER              S4000
5155-2442.8079-01BUMPER              S4000
5275-0442.8090-01BRACKET-ADAPTER     S4000
5650-0442.9164-00SPIDER CAP S4000
6305-0442.8098-00LWR CONCAVE C   M1    S4800
6305-0442.8098-90LWR CONCAVE C  M2     S4800
6305-0442.8114-00LWR CONCAVE EC  M1    S4800
6305-0442.8114-90LWR CONCAVE EC  M2     S4800
6305-0452.0273-901LWR CONCAVE MC M1   S4800 
6305-0452.0273-902LWR CONCAVE MC   M2  S4800
6390-0442.8099-00UPR CONCAVE C  M1     S4800
6390-0442.8099-90UPR CONCAVE C  M2     S4800
6390-0442.8115-00UPR CONCAVE EC  M1    S4800
6390-0442.8115-90UPR CONCAVE EC  M2     S4800
6390-0452.0274-901UPR CONCAVE MC M1   S4800
6390-0452.0274-902UPR CONCAVE MC M2   S4800
6900-0442.8105-00FEED HOPPER         S4000
8553-0442.8645-00HYDRAULIC HOSE GUARD   S4000
8950-9442.1561-01KEY-WOODEN WEDGE    S4000
PART   NUMBERDESCRIPTION
442.8735-00BOTTOM SHELL ASM   S&H6000
442.8760-00PINIONSHAFT ARM LNR   H6000
442.8759-00NARROW ARM LINER  S&H6000
900.2108-00ELBOW 4" A4 SMS   435
442.8742-01BOTTOM SHELL BUSH   S&H6000
900.0921-00TEE CPLG 3/4 SA   4072,415 H6000
900.1412-00PIPE 3/4 X 70 KREA   SMS 1787
442.8741-01DUST COLLAR       S&H6000
442.8762-01LOCATING BAR      S&H6000
442.8809-01SHIM 0.1 THK(0.003)   S&H6000
442.8809-02SHIM 0.5 THK(0.02)   S&H6000
442.8809-03SHIM 0.7 THK(0.03)   S&H6000
442.8809-04SHIM 1.0 THK(0.04)   S&H6000
442.8808-01DUST COLLAR GASKT   S&H6000 (2-PIECE)
442.8747-01INNER SEAL RING   S&H6000
442.8733-01ECCENTRIC           H6000
442.8824-01ECC BUSH 18+20+24+28   H6000
442.8825-01ECC BUSH 28+32+36+40   H6000
442.8826-01ECC BUSH 40+44+48+50   H6000
442.8743-00RING  (TWO PIECE) S&H6000
442.8723-00GEAR & PINION SET   H6000(SOLD AS SET)
442.8807-01ECC GEAR KEY      S&H6000
442.8761-01WEARING   PLATE-ECC   H6000
442.8722-01HYDROSET CYLINDER   S&H6000
442.8724-01HYDROSET CYL   BUSH  H6000
873.1152-00O-RING 625 X7 SMS1587   H6000
442.8758-00PISTON            S&H6000
442.8730-01PISTON WRG PLATE  S&H6000
442.8731-01STEP WASHER       S&H6000
442.8739-00CHEVRON PACKING   S&H6000
442.8726-01HYDROSET CYL   COVER  H6000
873.1153-00O-RING 510 X5,7   SMS1587 H6000
442.8749-01HYD CYL COVER GASKT   H6000 HYD CYL CO
442.8783-01COVER PLATE CLOSURE   PLUG H6000
984.0623-00TRANSDUCER PROBE H/S   6000
442.8847-901PINIONSHAFT ASSY   (LESS PINION)
442.8764-01PINIONSHAFT HSG   S&H6000
442.8803-01PINSHAFT HSG GASKET   S&H6000
442.8803-02PINSHAFT HSG GASKET   S&H6000
442.8803-03PINSHAFT HSG GASKET   S&H6000
868.0799-00SPHERICAL ROLLER   BEARING H6000
868.0806-00SPHER ROLLER BEARNG   H6000
442.8771-01SPACER-SHV&PIN   ENDS& H6000
873.1161-00OIL SEAL RING CC    H6000 OIL SEAL R
442.8766-01PINSHAFT SEAL PLT   S&H6000
442.8765-01PINSHAFT SEAL PLT   S&H6000
442.8775-01PINSHAFT SEALPLT   GASKET H6000
442.8774-01PINSHAFT SEALPLT   GASKET H6000
442.8774-02PINSHAFT SEALPLT   GASKET H6000
442.8772-01PINIONSHAFT       S&H6000
857.0350-00KEY T 25X14X95 SMS   2307 H6000
442.8778-01OIL LEVEL PLUG    S&H6000
442.8787-01WASHER-SHEAVE   RETAINER H6000
442.8788-01SPACER-SHEAVE   RETAINER H6000
442.8848-901MAINSHAFT ASM H6000
442.8767-01MAINSHAFT           H6000
442.8792-01MAINSHAFT SLEEVE    H6000
853.0119-00PARALLEL PIN
442.8732-01MAINSHAFT STEP    S&H6000
442.8763-01HEADCENTER          H6000
442.8819-01MANTLE A   M1         H6800
442.8819-02MANTLE A   M2         H6800
442.8820-01MANTLE B  M1          H6800
442.8820-02MANTLE B  M2          H6800
442.8821-01MANTLE D  M1          H6800
442.8821-02MANTLE D  M2          H6800
442.9355-01MANTLE EF  M1         H6800
452.0820-001MANTLE H6000 EEF M1
452.0820-002MANTLE EEF M2  H6800
442.8800-00HEADNUT W/BURN RING   H6000
442.8791-01INNER HEAD NUT   H6000 **SEE I-NOTE*
442.6427-01BURNING RING     S&H6000
442.8802-01DUST SEAL RING    S&H6000
442.8801-01RETAINER RING     S&H6000
442.8804-01DUST SEAL RETAINER   H6000
442.8805-01SCRAPER           S&H6000
442.8849-901TOPSHELL EC2
442.8812-01SPIDER ARM   SHIELD   H6000
900.0243-00SCRENED SOCKET
442.8753-01SPIDER CAP          H6000
873.1160-00O-RING 529,3X5,7   SMS1587 H6000
442.8754-01SPIDER BUSHING    S&H6000
442.8755-01OIL SEAL RING     S&H6000
442.8813-01CONCAVE RNG EC  M1    H6800
442.8813-02CONCAVE RNG EC  M2     H6800
442.8814-01CONCAVE RING C  M1    H6800
442.8814-02CONCAVE RING C  M2    H6800
442.8815-01CONCAVE RNG MC  M1    H6800
442.8815-02CONCAVE RNG MC  M2     H6800
442.8816-01CONCAVE RING M  M1    H6800
442.8816-02CONCAVE RING M  M2     H6800
442.8817-01CONCAVE RNG MF  M1    H6800
442.8817-02CONCAVE RNG MF  M2     H6800
442.8818-01CONCAVE RING F  M1    H6800
442.8818-02CONCAVE RING F  M2    H6800
442.9356-01CONCAVE RNG EF  M1    H6800
442.9356-02CONCAVE RNG EF  M2     H6800
452.0832-001CONCAVE H6000 EEF M1
452.0832-002CONCAVE EEF M2 H6800
442.8823-01FILLER RING (M &   MC) H6000
442.8863-01FILLER RING (F, MF)   H6000
442.8881-01WASHER-CONCAVE      H6000
442.7252-01SHIM 1X80X20 1142-32   H4000
442.7252-02SHIM 3X80X20 1312-00   H4000
442.7252-03SHIM 5X80X20 1312-00   H4000
442.7252-04SHIM 10X80X20 1312-00   H6000
442.8908-01HOSE                H6000
442.9415-00WEAR PLATE
863.0058-00DISC SPRING 90X46X5   H4000
442.8793-01CONCAVE CLAMPING RING   H6000
972.0532-00MOTOR MBT112M 1800RPM   6HP LUBE H6800
843.1267-00STUD SCREW 12X45 5,8   S&H6000
919.0170-00BLADDER COMPLETE   20L     H3800/H6800
919.0174-00ACCUMULATOR ASM     H6000 FOR BLADDE
442.8777-00CHECK VALVE
900.2026-00MAGNETIC PLUG 3/4   S&H6000
442.5904-01FIXING PLATE   H6000& H8000
442.9781-00TOP PLATE COMP   MTGH&S6000
442.8879-00LIFTING TOOL/ECC SL   H6000
442.8880-00LIFTING TOOL/BTM   SHELL
843.1511-00STUD BOLT
CATALOGPART NUMBERDESCRIPTION
1320-0442.9042-01ACCESS HOLE SIDE LNR   6000
1322-0442.9043-01BSHELL SIDE LINER   H/S6000
1324-0442.9040-01PINION ARM SIDE LINR   6000
1326-0442.9041-01NARROW ARM SIDE   LNR  6000
1805-0442.8973-01ECCENTRIC           S6000
1810-0442.9033-01ECC BSHG   20-25-30-35-40 S6000
4001-0452.1700-901MAINSHAFT ASY W/O   MANTLE S6800
4005-0442.8971-01MAINSHAFT  S6000
4025-0442.8792-01MAINSHAFT SLEEVE    H6000
4160-0442.8974-01HEADCENTER          S6000
4175-0442.8982-01MANTLE A   M1         S6800
4175-0442.8982-02MANTLE A  M2     S6800 
4175-0442.8983-01MANTLE B   M1         S6800
4355-1442.8805-01SCRAPER           S&H6000
5005-0442.8970-01TOPSHELL            S6000
5110-0442.8975-01RIM LINER           S6000
5150-0442.8976-01SPIDER ARM   SHIELD  S6800
5605-0442.8969-00SPIDER    S6000
5660-0442.8977-01SPIDER CAP          S6000
5675-0442.8754-01SPIDER BUSHING    S&H6000
6304-0442.9071-90LOWER CONCAVE RING   C  M2 S6800
6305-0442.8979-00CONCAVE LWR EC  M1    S6800
6305-0442.9071-00CONCAVE LWR C  M1     S6800
6395-0442.8981-00CONCAVE UPR EC  M1    S6800
6395-0442.9072-00CONCAVE UPR C  M1     S6800
6395-0442.9072-90CONCAVE RING-UPR C   M2  S6800
PART   NUMBERDESCRIPTION
452.0317-901PINIONSHAFT ARM   LINERS H8800
452.0314-901NARROW ARM LINER  H8800
442.9396-00BEND-ELBOW          H8000
900.2199-00FLANGE, PARTED   SAE3000  4"
873.0129-00O-RING   3.0X109.4X115.5
442.9248-01BOTTOMSHELL BUSHING   H8000
442.9539-01WEARING PLATE       H8000
442.9539-02WEARING PLATE       H8000
442.9540-01WEARING PLATE       H8000
442.9541-01WEARING PLATE       H8000
442.9541-02WEARING PLATE       H8000
442.9542-01WEARING PLATE       H8000
442.9542-02WEARING PLATE       H8000
452.0313-901BOTTOMSHELL LINERS   H8800
442.9307-01DUST COLLAR         H8000
442.9309-01RING                H8000
442.9308-02LOCATING BAR        H8000
442.9362-01SHIM 0,1 THK(0.003)   H8000
442.9362-02SHIM 0,5   THK(0.02)  H8000
442.9362-03SHIM 0,7   THK(0.03)  H8000
442.9362-04SHIM 1,0   THK(0.04)  H8000
841.0256-00CAPSCREW HEXSOC   M10-1.50X 50
442.9363-01DUST COLLAR   GASKET  H8000
442.9310-01INNER SEAL RING     H8000
847.0063-00WASHER ZINC 10 X 26 X   65
442.9530-02SCREW M6S 42X140 8.8   H8000
442.9245-01ECCENTRIC           H8000
442.9357-01ECC BSHG 24/28/32/36   H8000
442.9358-01ECC BSHG 36/40/44/48   H8000
442.9359-01ECC BSHG 48/52/56/60   H8000
442.9360-01ECC BSHG 60/64/68/70   H8000
442.9246-01HUB                 H8000
442.9274-00RING                H8000
442.9469-01KEY R 32X18X360     H8000
847.0181-00SPRING WASHER M16 X   17X30
442.9311-00GEAR & PINION   SET   H8000 SPIRAL BEV
442.9275-01ECCENTRIC GEAR   KEY  H8000
442.9249-02ECC WEARING   PLATE   H8000
853.0646-00PIN PRYM N 16 X   45  H4000
442.9253-01HYDROSET   CYLINDER   H8000
442.9980-01HYDROSET   CYLINDER  H8800
442.9256-01HYDROSET CYL   BUSH   H8000
873.1211-00O-RING   SEE 873.1211
442.9743-00HYDROSET PISTON ASM   H8000
853.0988-00PARALLEL PIN
442.9724-01PISTON WEARING PLT   H-8000
442.9722-01STEP WASHER        H-8000
442.9257-00CHEVRON PACKING     H8000
442.9304-01PACKING CLAMP PLATE   H8000
442.9255-00HYDROSET CYL   COVER  H8000
873.1233-00O-RING
873.1210-00O-RING
442.9815-901PINIONSHAFT ASSM
442.9258-01PINIONSHAFT HOUSING   H8000
442.9806-01PINION SHAFT   HOUSING  H8800
442.9364-01PINSHAFT HSG GASKET   H8000 0,5 THK
442.9364-02PINSHAFT HSG GASKET   H8000 0,8 THK
442.9364-03PINSHAFT HSG GASKET   H8000 1,5 THK
868.0832-00SPHERICAL ROLLER   BEARING H8800
00-813-252-007SPHERICAL ROLLER   BEARING  H8000
868.0832-00SPHERICAL ROLLER   BEARING H8800
00-813-250-076SPHERICAL ROLLER   BEARING H8000
442.9334-01PIN& SHV END   SPACER H8000
442.9808-01SPACER  H8800
873.1219-00SEAL RING
442.9261-01PINSHAFT SEAL PL   H8000 PINION END
442.9260-01PINSHAFT SEAL PL   H8000 SHEAVE END
442.9365-01PINSHAFT SEALPLT   GASKET H8000
442.9366-01PINSHAFT SEALPLT   GASKET H8000
442.9366-02PINSHAFT SEALPLT   GASKET H8000
853.0590-00SPRING PIN PRYM N   8X28 H4000
442.9259-01PINIONSHAFT         H8000
442.9807-01PINION SHAFT  H8800 
857.0353-00KEY
857.0354-00KEY
842.0020-00SCREW
442.9346-01OIL LEVEL PLUG      H8000
442.9342-01WASHER-SHEAVE   RETAINER H8000
442.9343-01SPACER              H8000
442.9732-ADMAINSHAFT ASM    H8000
452.9998-901MAINSHAFT   ASSEMBLY  H8800
442.9294-01MAINSHAFT SLEEVE    H8000
853.0988-00PARALLEL PIN 
442.9723-01MAINSHAFT STEP     H-8000
442.9314-01MANTLE A   M1         H8800
442.9339-01MANTLE B  M1          H8800
442.9340-01MANTLE EF  M1      H8800 **I-NOTE**
442.9270-00HEADNUT W/BURN RING   H8000
442.9269-01INNER HEADNUT       H8000
442.9306-01BURNING RING        H8000
442.9271-01DUST SEAL RING      H8000
442.9272-01RETAINING RING      H8000
442.9367-01SCRAPER RETAINER  H8000
442.9368-01SCRAPER             H8000
442.9265-00SPIDER ARM   SHIELD   H8000 *I-NOTE*
452.0266-001SPIDER CAP   H8800
873.1232-00O-RING- 790,0 X 5,7   SMS 1586
442.9266-01SPIDER BUSH ALL THS   H8000
191.2376-00TEMPERATURE   TRANSMITTER
452.0418-001OIL SEAL RING/SCRAPER   H8800
452.0417-001RING   H8800
452.0419-001SUPPORT RING
442.9312-01CONCAVE RNG MF  M1    H8800
442.9336-01CONCAVE RING EC  M1    H8800
442.9337-01CONCAVE RING M  M1    H8800
442.9398-01CONCAVE RING C  M1    H8800
442.9471-01CONCAVE RNG MC  M1    H8800
442.9520-00FILLER RING MC      H8000
442.9352-01WASHER              H8000
452.1068-001WASHER   H8800
840.1136-00SCREW
442.9353-01SLEEVE              H8000
442.9354-01WASHER              H8000
863.0015-00DISC SPRING
442.9313-01SUPPORT RING        H8000
442.9521-00SPLITTER RH         H8000
442.9521-90SPLITTER LH         H8000
906.0412-00MECHANICAL SEAL   3884087
910.0104-00AIR-OIL   COOLER-STD  H8000
442.9485-08ROD 1312 SQ 12 L=80   H8000
442.9485-09ROUND BAR L=100     H8000
442.9490-01HYDRAULIC HOSE   R1" X 2100
442.9491-01HYDRAULIC HOSE   R3/4" X 2700
65-735-791-001CONVERSION ADAPTER   0.50BSPP MALE - 0
65-735-791-002CONVERSION ADAPTER   1.00BSPP MALE - 1
902.0061-00VALVE 1/4" FT   110   H8000
902.0761-00SHUT-OFF VALVE   7640-3/8" H8000
CATALOGPART NUMBERDESCRIPTION
1103-010-314-628-000LOWER SIDE LINER      806
1103-110-314-627-000UPPER SIDE LINER      806
1205-010-314-630-000SUPPORT BAR           806 2306-0
1208-0400.0465-001STAT JAW PL CORRUG M1
1208-0400.0465-002STAT JAW PL CORRUG M2
1209-010-314-625-000WEDGE                 806 2310-0
1300-053-468-022-000PROTECTION PLATE      806 2300-0
2010-053-267-931-000SHAFT ECCENTRIC       806
2012-000-813-249-006SPHERICAL ROLLER   BEARING CYLINDRICAL
2014-010-314-513-000SW JAW COUNTER FLANGE   806 SWING JAW
2015-010-314-512-000SWING JAW SEAL   PLATE  907
2100-010-314-514-000COUNTER FLANGE INNER   BRG 907
2101-010-314-515-000FRAME OUTER   COVER     907
2102-000-923-203-225SEAL V-RING D255 X 25   907
2104-000-813-249-005SPHERICAL ROLLER   BEARING TAPERED
2105-000-819-163-244ADAPTER SLEEVE    AH2344H
2106-010-314-516-000FRAME OUTER LABYRINTH   907
2207-059-425-417-009KEY 25 X 45 X 120
2215-053-467-374-000SPACER RING           907
2309-0400.0464-001SWING JAW PL CORRUG   M1
2309-0400.0464-002SWING JAW PL CORRUG   M2
2316-010-314-626-000DEFLECTOR PLATE
5003-010-314-624-000TOGGLE SEAT BLOCK
5004-010-314-632-000TOGGLE SEAT
5006-010-314-634-000TOGGLE PLATE          806
7003-153-467-395-500TENSION ROD   CLEVIS    907
7003-953-466-415-004THREADED ROD          907
7004-0127.0006-12SPRING, TENSION ROD   907
7005-053-367-366-500TENSION ROD   WASHER    907
9909-153-267-383-500LEFT BEARING   HOUSING  907
9909-210-214-509-500RIGHT BEARING HOUSING   907
CATALOGPART NUMBERDESCRIPTION
1103-010-314-404-000LOWER SIDE LINER      907, 1206
1103-110-314-386-000UPPER SIDE LINER-CAST   907, 1206
1205-010-314-481-000WEDGE PLATE           907
1206-0400.0314-002BOLT M20X160
1207-0845.0010-00HEX NUT-ZINC  M20-2.50
1207-1847.0132-00WASHER ZINC M20   3X21X36
1208-0400.0418-002STAT JAW PL CG M2
1209-010-314-429-000WEDGE SWING JAW       907
1210-000-920-144-909WEDGE BOLT ZINC
1300-053-467-117-000PROTECTION PLATE      907
2010-053-267-115-000SHAFT-ECCENTRIC       907
2012-000-813-249-006SPHERICAL ROLLER   BEARING CYLINDRICAL
2014-010-314-513-000SW JAW COUNTER FLANGE   806 SWING JAW
2015-010-314-512-000SWING JAW SEAL   PLATE  907
2100-010-314-514-000COUNTER FLANGE INNER   BRG 907
2101-010-314-515-000FRAME OUTER   COVER     907
2102-000-923-203-225SEAL V-RING D255 X 25   907
2104-000-813-249-005SPHERICAL ROLLER   BEARING TAPERED
2105-000-819-163-244ADAPTER SLEEVE    AH2344H
2106-010-314-516-000FRAME OUTER LABYRINTH   907
2207-059-425-417-009KEY 25 X 45 X 120
2215-053-467-374-000SPACER RING           907
2300-053-467-117-000PROTECTION PLATE      907
2306-010-314-481-000WEDGE PLATE           907
2309-0400.0417-002SWING JAW PLATE  CRG M2
2310-010-314-429-000WEDGE SWING JAW       907
2316-010-314-479-000DEFLECTOR PLATE       907
5003-010-314-517-000TOGGLE SEAT   BLOCK     907
5004-089-242-876-000TOGGLE SEAT           907
5006-089-242-877-000TOGGLE PLATE          907
6000-053-368-317-501HYDRAULIC JACK ASM 5   TON
7003-153-467-395-500TENSION ROD   CLEVIS    907
7003-953-466-415-004THREADED ROD          907
7004-0127.0006-12SPRING, TENSION ROD   907
7005-053-367-366-500TENSION ROD   WASHER    907
9909-153-267-383-500LEFT BEARING   HOUSING  907
9909-210-214-509-500RIGHT BEARING HOUSING   907




400.0483WT Jaw plate
CATALOGPART NUMBERDESCRIPTION
1103-010-314-263-000SIDE LINER-LWR (CAST)   1108/1208
1103-110-314-262-000SIDE LINER-UPPER   (CAST) 1108/1208
1205-010-214-269-000WEDGE PLATE         1108, 1208
1206-0400.0314-003SQUARE BOLT M20X180
1207-0845.0010-00HEX NUT-ZINC  M20-2.50
1207-165-651-001-015WASHER         3 X 21X 37
1208-0400.0410-002STATIONARY JAW PL   CORRUG  M2  1108
1208-0400.0436-001STAT/SWING JAW PLATE   WT(Z)  M1  1108
1208-0400.0437-001STAT JAW PL COARSE   CORRUG  M1   1108
1209-010-314-385-000WEDGE - SWING   JAW    1108
1210-000-920-144-909WEDGE BOLT ZINC 
2010-053-267-444-000ECCENTRIC SHAFT      1108
2012-000-813-249-004SPHER. BRG   24606CC/W33/C3
2014-010-214-414-000SW JAW COUNTR FLANGE   1108
2015-010-214-388-000SWING JAW   FLANGE1108/1206
2100-010-214-415-000COUNTERFLANGE   INNER  1108
2101-010-214-416-000FRAME OUTER   COVER    1108
2102-0873.1327-00SEAL V-RING
2102-1873.0910-00SEAL V-RING
2104-000-813-249-003SPHER BRG 23152   CK/W33/C3
2105-000-819-163-352ADAPTER SLEEVE     AH3152 .
2106-010-214-417-000FRAME OUTR LABERYNTH   1108
2107-000-819-137-244LOCKWASHER-BEARING MB   - 44
2108-000-819-121-044LOCKNUT-BEARING  NO-HM44T
2215-053-467-327-000SPACER RING          1108
2216-000-930-920-033BEARING LOCKNUT KM32   1108
2300-053-466-783-000PROTECTION PLATE
2306-010-214-269-000WEDGE PLATE    1108/1208
2309-0400.0409-002SWING JAW PLATE   CORRUG  M2   1108
2309-0400.0433-001SWING JAW PL COARSE   CORRUG  M1  1108
2310-010-314-385-000WEDGE - SWING   JAW    1108
2311-059-942-843-001SCREW  M33 x 880
2316-010-214-384-000DEFLECTOR PLATE      1108
5003-010-314-522-000TOGGLE SEAT   BLOCK    1108
5004-089-242-895-000TOGGLE SEAT          1108
5006-089-242-894-000TOGGLE PLATE         1108
6000-053-368-317-501HYDRAULIC JACK ASM 5   TON
6004-053-366-774-500HYDRAULIC CYL   ROD    1108
7003-153-466-668-500TENSION ROD   CLEVIS  1208
7003-953-466-415-001THREADED ROD         1208
7004-017-202-779-001SPRING, TENSION ROD   1208/1108
9909-153-166-775-500LEFT BEARING   HSG1108/1206
9909-210-114-387-500RIGHT BRG HSG   1108/1206
9910-053-473-796-003BOLT
CATALOGPART NUMBERDESCRIPTION
1103-010-314-404-000LOWER SIDE LINER      1206
1103-110-314-386-000UPPER SIDE LINER-CAST   1206
1205-010-214-269-000WEDGE PLATE   1108/1208
1206-0400.0314-003SQUARE BOLT M20X180
1208-0400.0415-002STATIONARY JAW PL   CORRUG  M2    1206
1209-010-314-246-000WEDGE STA JAW   1206/1208
1210-000-920-144-909WEDGE BOLT ZINC
2010-053-266-909-000ECCENTRIC SHAFT      1206
2012-000-813-249-004SPHER. BRG   24606CC/W33/C3 SPHERICAL
2102-0873.1327-00SEAL V-RING
2102-1873.0910-00SEAL V-RING
2104-000-813-249-003SPHER BRG 23152   CK/W33/C3 SPHERICAL
2105-000-819-163-352ADAPTER SLEEVE     AH3152 .
2106-010-214-417-000FRAME OUTR LABERYNTH   1108
2107-000-819-137-244LOCKWASHER-BEARING MB   - 44
2108-000-819-121-044LOCKNUT-BEARING  NO-HM44T
2300-053-466-918-000PROTECTION PLATE   1206
2309-0400.0414-002SWING JAW PLATE   CORRUG  M2   1206
2310-010-314-246-000WEDGE STA JAW   1206/1208
2316-010-214-255-000DEFLECTOR PLATE   1206/1208
5003-010-314-425-000TOGGLE SEAT   BLOCK    1206
5004-089-242-707-000TOGGLE SEAT          1206
5006-010-214-523-000TOGGLE PLATE         1208
5016-053-467-347-000SHIM             907/1206
6000-053-368-317-501HYDRAULIC JACK ASM 5   TON
7003-153-466-668-500TENSION ROD   CLEVIS  1208
7003-953-466-415-003THREADED ROD         1206
7004-017-202-779-001SPRING, TENSION ROD   1208/1108
7004-0400.0450-001SPRING TENSION ROD
9909-153-166-775-500LEFT BEARING   HSG1108/1206
9909-210-114-387-500RIGHT BRG HSG   1108/1206
CATALOGPART NUMBERDESCRIPTION
1103-010-314-263-000SIDE LINER-LWR   (CAST)1208 SIDE LINER
1103-110-314-262-000SIDE LINER-UPPER   (CAST) 1208
1205-010-214-269-000WEDGE PLATE          1208
1206-0400.0314-002BOLT M20X160
1208-0400.0408-002STATIONARY JAW PL   CORRUG  M2    1208
1208-0400.0411-001STAT/SWING JAW PLATE   WT(Z)  M1  1208
1208-0400.0413-002STATIONARY JAW PLATE   HD  M2     1208
1208-0400.0425-001STAT JAW PL CORRUG   COARSE  M1  1208
1209-010-314-246-000WEDGE STA JAW   1206/1208
1300-053-466-463-000PROTECTION PLATE    1208
2010-053-266-357-000ECCENTRIC SHAFT      1208
2010-053-267-179-000ECCENTRIC SHAFT   1208/1211
2012-000-813-249-002SPHERICAL ROLLER   BEARING CYLINDRICAL
2014-0402.7388-01SPACING COLLAR-LABYR   1211/1208
2015-0402.7389-00LABYRINTH COVER &   PLUGS   1211
2100-032-402-739-101SPACER,INR LABYRINTH   1208
2101-032-402-739-001SEALPLATE,INNER LABY   1208
2102-000-923-203-315SEAL V RING
2104-000-813-249-001SPHERICAL ROLLER   BEARING
2105-000-819-163-364ADAPTER SLEEVE    AH3164H     *i-note*
2106-0402.7392-01LABYRINTH RING-OUTER   1211
2107-000-819-137-256LOCKWASHER-BEARING   MB- 56
2108-000-930-920-056BEARING LOCKNUT   TR280X4 1208/1211/
2307-000-920-241-105SCREW M20X200
2309-010-114-743-000SWING JAW PL   1208 **I-NOTE**
2309-0400.0407-002SWING JAW PLATE   CORRUG  M2      1208
2309-0400.0420-001SWING JAW PL COARSE   CORRUG  M1  1208
2316-010-214-255-000DEFLECTOR PLATE   1206/1208
2317-053-467-202-000SAFETY KEY
5003-010-314-265-000TOGGLE SEAT   BLOCK    1208
5003-010-314-495-000TOGGLE SEAT   BLOCK    1208
5004-017-201-650-001TOGGLE SEAT
5006-010-214-523-000TOGGLE PLATE         1208
7003-153-466-668-500TENSION ROD   CLEVIS  1208
7003-953-466-415-001THREADED ROD         1208
7004-017-202-779-001SPRING, TENSION ROD   1208/1108
7005-053-366-376-500WASHER,TENSION   ROD   1208
7007-053-366-379-500PUSHER PLATE-   1108/1206/1208
9909-110-114-256-502BEARING HSG MACH LH   1208
9909-210-114-256-501BEARING HSG MACH RH   1208
9910-053-466-431-001STUD
CATALOGPART NUMBERDESCRIPTION
1103-1402.4239-01SIDE LINER,   UPPER    1211
1103-2402.4635-01CHEEK PLATE LOWER
1205-0402.4258-00JAW PLATE SUPT STRIP   1211
1208-0400.0444-001STAT JAW PL COARSE   CORRUG  M1   1211
1208-0400.0444-002STAT JAW PL COARSE   CORRUG  M2   1211
1208-1400.0426-001STAT JAW PLATE HD M1   1211
1208-2400.0427-001STAT JAW PLT MIDDLE   1211
1210-0402.4570-00TENSIONING STRIP
2010-053-267-179-000ECCENTRIC SHAFT   1208/1211
2012-000-813-250-086SPHERICAL ROLLER   BEARING 1211
2102-0873.1025-00V-RING
2104-000-813-249-001SPHERICAL ROLLER   BEARING
2105-000-819-163-364ADAPTER SLEEVE    AH3164H
2309-0400.0443-001SWING JAW PL COARSE   CORRUG  M1  1211
2309-0400.0443-002SWING JAW PL COARSE   CORRUG  M2  1211
2309-0400.0423-001SWING JAW PLATE-   HD  1211
2309-1402.2043-01SW JAW   PLATE-MIDDLE  1211
3400-0402.2320-00TENSIONING STRIP     1211
5003-0402.4270-01TOGGLE SEAT   HOLDER   1211
5006-0402.4607-01TOGGLE PLATE
7001-0402.4303-00RETRACTION BAR L1340   1211
7001-0402.4303-91RETRACTION BAR L=1500
7003-0127.0006-27SPRING,TENSION   ROD   1211




400.044

400.0442

400.0438

400.4039

400.0422

400.0421
CATALOGPART NUMBERDESCRIPTION
1103-010-214-352-000LOWER SIDE LINER     1312
1103-110-214-351-000UPPER SIDE LINER     1312
1205-010-314-356-000WEDGE PLATE          1312
1208-0400.0445-001STAT/SWING JAW PL   WT(Z) M1 1312 
1208-0400.0447-001STAT JAW PL   CORRUGATED M1 1312  
1208-0400.0963-001STAT JAW PL SHARP   TOOTHED M1
1209-010-214-355-000WEDGE-SWING JAW      1312
1221-053-366-632-501SCREW TAPERED   HEAD   1312
1300-053-466-616-000PROTECTION PLATE
2010-053-267-239-000ECCENTRIC SHAFT      1312
2012-000-813-249-008SPHERICAL ROLLER   BEARING CYLINDRICAL
2014-032-402-330-200SPACER, SWING   JAW    1312
2015-032-402-330-100SEALPLATE, SWING JAW   1312
2100-032-402-396-700SPACER, INR   LABYRINTH  1312
2101-032-402-419-900SEALPLATE, INNER    1312 *I-Note*
2102-100-923-203-405SEAL V-RING D405 X 25   1312
2104-000-813-249-007SPHERICAL ROLLER   BEARING TAPERED
2105-000-819-163-376ADAPTER SLEEVE   AH3176H 1312
2106-032-402-396-900SPACER,OUTR   LABYRINTH  1312
2108-000-819-121-168LOCKNUT-BEARING   HM3168 1312
2309-0400.0446-001SWING JAW PLT   CORRUGATED M1 1312
2309-0400.0964-001SWING PL SHARP   TOOTHED M1
2316-010-114-354-000DEFLECTOR PLATE      1312
2321-153-466-927-000WEDGE HEAD BOLT
5003-010-314-500-000TOGGLE SEAT   BLOCK    1312
5004-017-201-650-001TOGGLE SEAT
5006-010-214-535-000TOGGLE PLATE 775  1312
7003-153-466-629-500TENSION ROD   CLEVIS   1312
7003-953-466-415-002THREADED ROD         1312
7004-0400.0450-001SPRING TENSION ROD
7005-053-366-624-500MOVABLE SPRING PLATE   1312
9909-110-114-459-500LEFT BEARING HSG     1312
9909-253-167-007-500RIGHT BEARING   HSG    1312
9910-053-466-623-000GUIDE BOLT BRG   HSG   1312
CATALOGPART NUMBERDESCRIPTION
1103-1402.4521-01CHEEK PLATE, UPPER
1103-2402.4522-01CHEEK PLATE, LOWER
1205-0402.4386-00SUPPORT STRIP        1513
1205-0402.4386-00SUPPORT STRIP        1513
1208-0400.0485-001STAT JAW PLATE COARSE   CORRUG M1
1208-0400.0409-001STAT JAW PL SHARP   TOOTHED M1
1208-1402.4501-01STAT/SWING JAW PLATE   HD  M1     1511

442.6115-001

442.5271-001

Date:2021/07/01